DJI Matrice 600 + Ronin-MX
Rated 3.5/5 based on 11 customer reviews

DJI Matrice 600 + Ronin-MX

Available: In Stock
Wishlist Compare
$7,090.00
  • Order within

GENERAL

Built-In Functions
  1. Operation Modes
    -Underslung Mode
    -Upright Mode
    -Briefcase Mode
    -Aerial Mode
    -Jib or Wirecam Mode
  2. Built-in, independent IMU module
  3. DJI Specialized Gimbal Drive Motors with Encoders
  4. Bluetooth Module
  5. USB Connection
  6. 2.4GHz Receiver
  7. Temperature Sensor
  8. DJI Advanced 32-Bit DSP Processor
  9. D-Bus Receiver Supported

MECHANICAL & ELECTRICAL CHARACTERISTICS

Working Current Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Run Time 3 hours
Operating Temperature 5° F ~ 120° F (-15° C ~ 50° C)
Weight Including handle bar: 6.11 lb (2.77 kg)
Including vibration absorber: 4.74 lb (2.15 kg)
Gimbal Dimensions Excluding handle bar :
280 mm (W) x 370 mm (D)x 340 mm (H)
Including handle bar :
560 mm (W) x 370 mm (D) x 440 mm (H)

PERIPHERAL

Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 130mm
Maximum width: 160mm
Accessory Power Connections 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power 4S Ronin-M Battery
Connections 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements iOS 7.1 or above; Android 4.3 or above

WORKING PERFORMANCE

Load Weight (Reference Value) 10 lb (4.5 kg)
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan axis: 200°/s
Tilt axis: 100°/s
Roll axis: 30°/s
Mechanical Endpoint Range Pan axis control: 360°
Tilt axis control: +270° to -150°
Roll axis control: ± 110°
Controlled Rotation Range Pan axis control: 360°
Tilt axis control: +45° to -135°
Roll axis control: ± 25°

GENERAL

Built-In Functions
  1. Operation Modes
    -Underslung Mode
    -Upright Mode
    -Briefcase Mode
    -Aerial Mode
    -Jib or Wirecam Mode
  2. Built-in, independent IMU module
  3. DJI Specialized Gimbal Drive Motors with Encoders
  4. Bluetooth Module
  5. USB Connection
  6. 2.4GHz Receiver
  7. Temperature Sensor
  8. DJI Advanced 32-Bit DSP Processor
  9. D-Bus Receiver Supported

MECHANICAL & ELECTRICAL CHARACTERISTICS

Working Current Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Run Time 3 hours
Operating Temperature 5° F ~ 120° F (-15° C ~ 50° C)
Weight Including handle bar: 6.11 lb (2.77 kg)
Including vibration absorber: 4.74 lb (2.15 kg)
Gimbal Dimensions Excluding handle bar :
280 mm (W) x 370 mm (D)x 340 mm (H)
Including handle bar :
560 mm (W) x 370 mm (D) x 440 mm (H)

PERIPHERAL

Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 130mm
Maximum width: 160mm
Accessory Power Connections 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power 4S Ronin-M Battery
Connections 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements iOS 7.1 or above; Android 4.3 or above

WORKING PERFORMANCE

Load Weight (Reference Value) 10 lb (4.5 kg)
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan axis: 200°/s
Tilt axis: 100°/s
Roll axis: 30°/s
Mechanical Endpoint Range Pan axis control: 360°
Tilt axis control: +270° to -150°
Roll axis control: ± 110°
Controlled Rotation Range Pan axis control: 360°
Tilt axis control: +45° to -135°
Roll axis control: ± 25°